When it does, the printer will automatically resume operation.Įrror 8 Alternate Green Red FLASH memory is not programmed. Printing will stop until the printhead cools to an acceptable printing temperature.Press the Feed button to resume printing.Įrror 7 Flashing Amber The printhead is over temperature.Close the top cover and then press the Feed button to resume printing.Įrror 6 Double Flash Green The printer is paused.Read More>Įrror 5 Flashing Red The printhead is open. The printer has sensed the end of the ribbon roll. Replace the ribbon.(Does not apply to Direct Thermal models)
Read More>Įrror 5 Flashing Red The ribbon is out. The Zebra GX430t Thermal transfer desktop printer includes a 300 dpi printhead to ensure high-quality, crisp, clear printing of 2D barcodes, fine text and complex graphics - ideal for high-density data on small labels.
Follow the instructions for Loading Roll Media , and then press the Feed button to resume printing. As soon as all of the data has been received, the status LED will turn green and the printer will automatically resume operation. If the amber light persists, then the printer requires service.Įrror 4 Flashing Green The printer is receiving data. If this error continues, turn the printer power off for five minutes or more, and then turn on. If this error occurs after you have been printing, turn the printer power off and on, and then resume printing.Įrror 3 Solid Amber The printhead needs to cool down. When the printer is operating normally, the printer status light will be amber for about 10 seconds before turning green (solid or blinking).Įrror 3 Solid Amber There is a memory error. If this error occurs right after you turn on the printer, contact an authorized reseller for assistance. The printer has failed its power on self test (POST). Disconnect the printer from the wall outlet for 30 seconds and then reconnect the printer to the wall outlet.Įrror 2 Solid Green The printer is on and in an idle state.Įrror 3 Solid Amber. Check power connections from the wall outlet to the power supply, and from the power supply to the printer. The printer status indicator can be interpreted by reviewing the status indicator table.Įrror 1 The LED is off The printer is not receiving power. solid or flashing orange light ( amber light ). Symptoms addressed by this solution include: Regardless of the color, this status light is on anytime the printer is on. Regardless of the colour, this status light is on anytime the printer is on. The Zebra GK420D status indicator light is located on the feed button and indicates the current status of the printer. 
The status indicator light is located on the feed button and indicates the current status of the printer. Interpreting the status light colours and patterns, such as flashing red light, solid green light, solid red light and solid orange/amber light. GX-Series printer Status Indicator Information
0 kommentar(er)
